We're using cookies to ensure you get the best experience on our website. More info
Understood
@lesterknightRegistered March 10, 2011Active 5 months, 2 weeks ago
886 Replies made

MineStorm wrote:
Here’s something new – my 32MBit repro board –

That looks great. Are there any plans to release a new Flash Boy or will this design strictly be used for future homebrew reproductions?

VBmills wrote:

I wonder what that is then 😉

I really hope it and the 2-player link cable are ready around the same time. ;]

shiro_akechi wrote:
DogP most likely did the dumping

i do recall reading a reply from dogp on this site where he said he has never been asked to dump dragon hopper. the search function isn’t helping so perhaps someone else who recalls it can link you back to that comment.

vb-fan wrote:
I’ve always been fascinated with the idea of “time travel” — if I could ever build one (and then buy a dumper), I don’t know if I’d try to covertly copy one of the 1995 E3 display carts (did they remove them after hours?), or get a passkey for Gunpei’s hotel room while he was at dinner. It’s expected that he had ALL prototype carts.

(Bwaaaahahahaha!)

i would have been a volunteer for their floor staff, and then taken a cart at the end of the 1st night and mailed it to a PO box. “where is it” — “hell if i know” — “you are dismissed” — “ok” — then run home to the PO box.

anything that makes the site better is better for the site. it becomes better for its members and guests. if you have the means and time to remake all of the music collections, then you should do so. i same could be said for screen shots, information, multimedia, etc.

VectrexRoli2 wrote:
I also got now my display units fixed by Runnerpack and I am quite happy with the results:

http://youtu.be/N7CmNjc2E4w

🙂

i’m curious about the part where you clean the contacts. you mentioned that you still had some lines and so you cleaned the contacts. we already had reports that the lines are being caused by dust on the plastic lens over the LEDs, and that wiping that area will get rid of those black lines. this makes me curious, could the lines be caused by both dust on the contacts and dust on the LEDs?

GasMasksOfThePast wrote:
It’s disheartening to inform you, but Red Metal passed a way in late December. Thank you guys for expressing interest in his project. It brought him a lot of excitement and he talked about it with me a lot.

that really choked me up when i read that. thank you for taking the time to register and to let us know.

reading gaming mags in the 94/95 and then playing a demo unit at Toys R Us.

i have a japanese tap new in box, are you looking for the american tap?

that is the cable dogp is working on. i am not sure who else is involved with it.

http://www.planetvb.com/modules/newbb/viewtopic.php?topic_id=4117&forum=1

i also noticed that various usb cables caused different results. i try to use the one provided by Richard.

it makes my eyes burn and gives me headaches.

Once again, another description compiled after 2 minutes of Internet “research”.

I would have camped out by the VB and told the real history of its development, ad campaign, release, and eventual discontinuation. It upsets me how it has gone down in history with blurbs made up of incorrect and misleading information.

Thanks for sharing Blitter. It is really neat to see one out in the wild like that. I only wish it could have made a better impression.

it is funny that other people experience the same phenomenon. my vb just sort of magically clips in place. even when its open more than far enough to accept the vb, it doesn’t always seem to go into the clip. it is so odd. lol

thank you very much!

you can probably grab a stand for around $30. just make sure to ask the seller if the center medallion is free of cracks. it is the weak point of the design. once you find one, you can still turn a profit.

i hope you get a chance to test it out. it was a very unique system that never seems to get the credit it deserved. back then if you didn’t turn a profit you were a failure. based on what the VB set out to accomplish, it was a success. somewhat limited by its monochromatic display, but a success non-the-less.

my box had the warranty card and the mail-away card for a free set of batteries (from what i recall, its in storage now). from a collector’s point of view, yea they may be nice to have. adding value? there were an estimated 770,000 units sold and the vb was on the market for less than a year. i would bet that a lot of those warranty cards weren’t sent in. i have seen them often. however, most vb’s i see for sale are without a box. so perhaps the card would be considered rare. although, i don’t see how it would increase the value much. its a nice thing to have, for a completest, but adds nothing to the experience of playing vb games.

$5 for a vb is incredibly cheap. is it complete (vb, eye shade (without tares), stand (without cracks to the medallion), controller, battery pack, and mario tennis)? by comparison, i spent $145 on my boxed unit and it came with 3 games and the AC adapter.

have you tried it yet, is it working? a common issue with the vb is the displays will glitch up. this is due to the fact that nintendo used glue to secure them, and that glue just doesn’t last the test of time. it is possible to fix this issue, so if you do indeed have it, don’t get upset. =)

if you are asking about the rarity of the card because you are wanting to sell the vb to your co-worker, i would say that a fully working vb without the major issues (cracked stand, torn eye shade, etc) would be worth around $75. they close for less on eBay and often more, but right around that price would be a good starting point. if you have some games and the AC adapter, then the price should go up.

speedyink wrote:
There is no way to emulate the look/feel/sound/control of the actual console properly in my opinion.

the vbjin port for the rift may have something to say about that. =) especially with a vb controller-to-usb kit.

i’ve never understood the fascination with pokemon or why everyone of that generation wants a pokemon homebrew. i’ve tried a variety of the games and found them repetitive and exhaustive.

that is a project better suited for a WIKi article. on this forum we can’t even edit our posts after 30 minutes. a thread discussing working games is going to grow out of proportion quickly.

here is an established video game community with a working wiki install. as long as no roms are linked/hosted to/from the page, there will not be a problem.

http://wiki.gbatemp.net/wiki/Main_Page

here are some examples:
http://wiki.gbatemp.net/wiki/Gbaemu4ds_Compatibility_List
http://wiki.gbatemp.net/wiki/LolSnes_Compatibility_List

since there are already projects which archive all gb/gbc dumps, it would be trivial to populate such an article with a full list of available roms. then it is just a matter of the community making edits to help establish what is working and what is not.

as far as the 2MB compilation problem, perhaps someone should instead look into the existing padding application or the app that makes the compilation should be updated to pad out to 2MB.

some of the projects have made their way to reproduction carts, but for almost the cost of 1 of these you could grab a FB+.

read more about it here:
http://www.planetvb.com/modules/hardware/?type=flashcarts&v=fb
http://www.aptd07.dsl.pipex.com/new_page_9.htm

here is a guide that helped me: http://www.projectvb.com/dissect.html

i went the gamebit route as i had access to a grinder at the time. i made it thinner until it fit and then used a dremel to notch a slot for a screwdriver in the top.

after you open it, consider replacing the security screws. i used these: http://www.grattanfasteners.com/ItemForm.aspx?item=065003&Category=9442bbcb-92a2-4178-b89e-6e8e0efa0cd2

they are the right size, thread count, etc, for the virtual boy. most local hardware stores will stock them in an 8 or 12 pack for around $2.